Move-IT™ Part Transfer Conveyors

Sturdy formed steel frame construction, heavy-duty bearings and simple straight-forward design that is both reliable and easy to maintain.
Electrical components and variable-speed drive motors are available to match the power needs of each installation.
Durable cleated belts allow you to move parts and scrap up and down inclines as well as along horizontal runs for maximum layout flexibility.
Belt styles include: standard fabric or mattop belts, cleated belts for steep inclines, or scoop cleated belting for maximum versatility.

These conveyors are available in several different styles. See below.

Description

Suited for horizontal or incline conveying.
Great under-press applications, box transfer, and scrap removal.
Optional built-in chute collects parts or scraps for transport.
Standard belts can be used for 10° inclines. Cleated belts keep materials moving for higher angles.

Designed to receive parts that discharge underneath machinery. It then conveys the parts where needed.
Standard belts are PVC with 1-1/2″ cleats and polypropylene belts with 2-inch cleats. Both belts on 16″ centers.
Incline angles are 30°, 45°, and 60°.
Standard in-feed flaps contains product.

Design combines the capabilities of horizontal and incline conveyors in a single unit.
Able to collect parts from underneath machinery.
The standard fabric belt is PVC with 1-1/2″high cleats on 16 inch centers.
Incline angles are 30°, 45°, and 60°.
In-feed flaps to contain products are standard.

Made to receive parts from overhead and transfer them to a lower level. It can also be used to elevate parts where needed.
Available with high friction or cleated belts.
Incline angles are 30°, 45°, and 60°.

Designed to receive small parts from overhead operations and convey them down to consolidation areas.
Offer inclines of 45°, 60°, and 75°.
Standard fabric belt is PVC with 1″ cleats on 6″ centers. Higher cleats are recommended for steep inclines.
In-feed hoppers and discharge chutes are standard equipment.