Cryoflex 50 SSN940 Cryogenic Hose

Nylon lined composite hose assemblies suitable for a wide variety of refrigerated liquefied gasses such as anhydrous ammonia, butadiene, butane, propane, propadiene, liquid ethane and liquid CO2.

Manufactured with high tensile strength T316 stainless steel inner and outer wires with engineered resistant barrier layers embedded in the hose wall to prevent permeation and leakage. Hose assemblies are capable of pressurization and full vacuum with a diverse selection of end fittings. Bore sizes 4” (100mm), 6” (150mm) and 8” (200mm) are certified as complying with The IMO Gas Carrier Code (Type Approval temperatures to minus 50C (-58F) and pressures to 10 bar (150psi) and USCG regulations 33 CFR Section 127.1102. Hose assemblies are available for rope lagging for additional dragging protection and insulation. Working pressures of up to 350 psi (25 bar) with conformance to EN 13765:2010 and working temperatures from -88 C (-128 F) to 135 C (275 F).


  • Agriculture
  • Biofuel
  • Chemical
  • Cryogenic
  • Industrial Manufacturing
  • Marine
  • Military
  • Oil & Gas
  • Transportation


This type is designed for use the safe transfer of fully refrigerated conveyonts in rood and roilcar, in plant and ship-to-shore or ship-to-ship transfer applications including the following Acetoldehyde, Ammonia (anhydrous), Butodiene, Butane/Propane, Butylene, Ethylomine, Ethylomine, Polypropylene, Refrigerant Gasses, Vinyl Chloride.

Also suitable for Liquid Ethane to -128°F (-89°C), Liquid Ethylene to -157°F (-105°C) and Liquid CO2.


  • EN13766:2010
  • USCG 33CFR 127.1102


Bureau Veritos Type Approval for IGC & IBV Code and relevant requirements of the Society for handling Propane, Propylene, Butylene, Butane, Anhydrous Ammonia and Vinyl Chloride for 4″ to 8″ diameter hose.



  • Color/Cover: White Green Stripe/Nylon (Rope Logging for Extra Protection and Insulation Available)
  • Inner Wire: T316 Stainless Steel
  • Inner Lining: Nylon
  • Carcass: Polyomide, Nylon Fabrics and Polyomide Films
  • Outer Wire: T316 Stainless Steel
  • Logo: Cryoflex® 50

Physical Properties

  • Temperature Range: -128°F to +150°F (-88°C to +66°C)
  • Maximum Elongation: ≤10% on test pressure
  • Vacuum Range: 26 inHg (660 mmHg), 0.9 bar
  • Electrical Properties: Electrically Conductive; ≤1.0 ohm/m for size 2″ and above

End Fittings

Specially designed end fittings hove been developed for use with Titeflex US Hose composite hoses that hove a unique leak-proof sealing face and specially machined helical spiral shank which engages into the corresponding internal helix wire when secured into the hose by either crimping or swaging the external ferrules.