96 High Pressure Trunnion Mounted Ball Valve

  • Forged or rolled bars, sourced and stocked only from high quality mills.
High Δp (differential pressure)
  • Up to 414bar (6,000psi) full Δp class 2500 depend on series and size.
Robust design
  • Pressure containing parts are in compliance with ASME B16.34.
  • A one-size-up stem made of high tensile material complies with ASME B16.34 and API 6D (#6D-1278) for drive train requirements provides a sufficient safety factor during operation.
  • A special hybrid seat design provides a higher metal seat stiffness and bubble tight shut-off (Rate A) combined with lower operating torque compared to equivalent similar valve solutions.
Pressure tested
  • Designs are burst-proof tested for 4 times the maximal working pressure.
  • Designed and tested per EN 14432:2014
  • Type test certified by DNV-GL (for part of the series)


Size Range: 2″ to 12″ (DN50 – DN300)

Pressure Range: Class 2500

Design Features

  • 3-piece robust, forged valve
  • Double block
  • Blowout-proof robust stem design
  • Bi-directional as standard
  • API 6D certified (API monogram #6D-1278)
  • Fire safe designed to API 6FA, API 607, ISO 10497
  • Comply with NACE MR0175/ISO 15156
  • Corrosion resistant low friction bearings
  • Double Piston Effect or Single Piston Effect seat design
  • Mixed SPE and DPE seats design also available
  • Integral top-works direct mounting pad to ISO 5211
  • 6” and larger valves are equipped with lifting lugs
  • 8” and larger valves can be equipped with vent and drain valves (Optional)
  • Antistatic grounding between ball, stem & body