Description
Size Range(s)
- NPS 2 – 24
- (DN 50 – 600)
Pressure Rating
- ASME Classes 150-600
Standard Connections
- Flanged
SB-150-300-600 Cast Metal Seated Ball Valves
- Severe service metal-seated blal valves for high temperature, abrasive, and corrosive applicaitons
- Off-center split-body design allows the use of advanced spiral-wound gaskets.
- Maximum temperature for CF8M 1,000°F (538°C), for WCB 800°F (426°C).
- Full port ensures large capacity and reduces the risk of clogging when handling solids or slurries.
- Valve/packing meets ISO and API Fugitive Emissions Standards, and corrosion test requirements.
- Wall thickness complies with ASME B16.34 and BS 5351 for NPS 2–12 (DN 50-300) ASME 150 and 300 full port only.
- Stem bearing reduces side thrust effect on packing and prevents stem wobbling.
- Integral seat locking option does not require additional parts or special tools.
- Scraper seats standard.
- Ball and seats lapped for optimum performance and tight shutoff.
- Low emission stem seal.
- Blowout-proof stem.
- Two-piece flanged gland. Live-loaded as standard.
- All valves with graphite packing and backup seal are inherently fire safe.
- Can be used for manual throttling applications. (For automation contact Velan Engineering.)
- Manual operation with handle for NPS 2–4 (DN 50 –100) FP and NPS 3–6 (DN 80–150) RP. 6 NPS (DN 150) FP, NPS 8 (DN 200) RP and larger require gear or actuator. Gear or pneumatic actuator available.
- Tightness rates: Allowable leakage rate at full ΔP: ASME/FCI 70-2 Class V. Tighter shutoff available upon request.
- Oversized ball to stem connection provides: no deformation of the stem slot in the ball; better throttling control performance; and less motion loss and wear in automatic on-off applications.
