Description
The overpressure protector consists of a spring loaded piston valve. Under normal pressure conditions the spring holds the valve open. When the system pressure exceeds the set pressure, the force exerted by the spring is overcome and the valve closes. The valve will remain closed until the system pressure drops approx. 25 % below the closing pressure, where-upon the force of the spring will open the valve.
Factory setting see data sheet.
To change setting:
Turn adjusting screw clockwise – closing pressure higher
(or counter clockwise – closing pressure lower)
*Overpressure protectors must not be used as control devices.
Standard Features
½” NPT male inlet, female outlet
½” NPT to ¼” NPT adaptors available
Body
316Ti SS
Piston Valve
316Ti SS
O-Ring
FPM (Viton)
Operating Temperature (Media)
176 °F (80 °C maximum)