FDA300 Clean Steam Trap

Sanitary Steam Traps are designed to offer free flow-through internal passages by incorporating very smooth internal finishes (20-25 Ra). For periodic passivation and sanitation of the system, these traps offer a tri-clamp connection on the body to allow for removal of the thermal element.

Clean Steam Traps are steam traps designed for similar functionality as the sanitary traps, but do not offer the same level of surface finish.

FDA300 Series high-capacity thermostatic clean steams traps are used on clean steam applications, and for condensate drainage on CIP/SIP systems and various process vessels.

  • All wetted parts are 316L stainless steel
  • Electro-polish finish of 20-25 microinches RA on internal surfaces of body
  • Electro-polish finish of 25-32 microinches RA on external surfaces of body
  • Operates close to saturation curve to minimize condensate back-up
  • Completely self-draining in the vertical downward flow orientation

Description

FDA300 Clean Steam Trap Series high-capacity thermostatic clean steams traps are used on clean steam applications and for condensate drainage on CIP/SIP systems and various process vessels.

This trap contains a welded 316L stainless steel thermal element that expands when heated and contracts when cooled. When air and subcooled condensate are present, the trap is in an open discharge position. When steam reaches the trap, the element expands, closing the trap tightly.