WPT Pump & Trap Combination

The WPT Series are stand-alone pump units with an appropriately sized External Steam Trap pre-assembled at the factory and mounted on a common base plate, allowing for simple installation. The WPT Series should be used when capacity requirements exceed the PMPT (pump with internal steam trap).

Includes: Body, Cover, Internal mechanism, Check valves and External Steam Trap

Model	Size	Type	Description	Max Motive Pressure (psig)	Fill Head
WPT-3	1-1/2" x 1-1/2"	NPT	PMPLS with 2" FTE-200	150	12"
WPT-4	2" x 2"	NPT	PMPC with 2" FTE-200	150	12"
WPT-5	3" x 2"	NPT	PMPC with 2-1/2" FTE-200	150	12"

Catalog Spec Sheet (pdf)

Description

WPT Pump & Trap Combination facilitates condensate discharge under all operating conditions, including vacuum.

Pump and Steam Trap are pre-mounted together on a single base for easy installation
Higher capacities than Pump-Trap combinations with internal steam traps (PMPT)
Engineering and selection is simplified using a pre-mounted system

NOTE: Reservoir – WPT Pump & Trap Combination may require a reservoir above the pump to collect condensate generated in the heat exchanger during the discharge cycle of the pump. Consult Reservoir Sizing Guidelines or contact factory for additional information.

Application Data Sheet – Fill Out and Return for Accurate Quote

Pressure Motive Condensate Pump Application Data Sheet