Description
WDS Air/Steam Moisture Separators are used for the removal of entrained liquid or solids from steam or air. Effective in applications where the system has an entrained liquid flow rate of up to 40% by weight of the unit’s flow capacity.
The WDS Series Separators are used for the removal of entrained liquid or solids from steam or air. Effective in applications where the system has an entrained liquid flow rate of up to 40% by weight of the unit’s flow capacity.
Wet steam enters the inlet of the separator where it is deflected in a centrifugal downward motion. The entrained moisture is separated out by reduction in velocity. Separated liquid then falls below the cyclone drip plate where it cannot be re-entrained. Dry steam or air then flows upward and exits through the outlet of the separator.
Catalog Spec Sheet (pdf)
I&M (pdf)
Model | Size | Type | Body Material | Weight (lbs) |
---|---|---|---|---|
WDS-13-N-DI | 3/4" | NPT | Ductile Iron | 23 |
WDS-14-N-DI | 1" | NPT | Ductile Iron | 26 |
WDS-15-N-DI | 1-1/4" | NPT | Ductile Iron | 30 |
WDS-16-N-DI | 1-1/2" | NPT | Ductile Iron | 45 |
WDS-17-F150-DI | 2" | 150# FLG | Ductile Iron | 50 |
WDS-17-N-DI | 2" | NPT | Ductile Iron | 50 |
WDS-18-N-DI | 2-1/2" | NPT | Ductile Iron | 95 |
WDS-19-F150-DI | 3" | 150# FLG | Ductile Iron | 95 |
WDS-19-N-DI | 3" | NPT | Ductile Iron | 95 |
WDS Air/Steam Moisture Separators are used for the removal of entrained liquid or solids from steam or air. Effective in applications where the system has an entrained liquid flow rate of up to 40% by weight of the unit’s flow capacity.