U Loops Press Ends

There is no “standard” hanging orientation for loops. Up, down, sideways; these are all acceptable. If steam is the media for the applications, loops should be double braided regardless the working pressure. The orentation for steam loops should be considered in such a way to avoid condensate build up. Shipping bars are included with all loops.

NSF 372 – LEAD FREE: The wetted surface of this product contacted by water contains less then one quarter of one percent (0.25%) of lead by weight. Material complies with state codes of standard where applicable, requiring reduced lead content. As in other configurations of Seismic Loops, choose from either 2″, 3″, or 4″ of motion from centerline. For steam service, EFP recommends placing the loops in either an inverted or horizontal installation when conveying steam. A drain port should also be specified for steam service. You can also add an eyelet at the 90° elbow to accommodate a support rod or cable.

U Loops 2″ and larger installed in any orientation other than hanging down MUST have the return supported. Custom configurations available to suite your needs.



  • Bronze


  • Bronze

End Fitting:

  • Copper Press Couplings

Fitting Material:

  • Copper