Carbon Steel Non-Electric Pressure Motive Pumps

Category: Tags: , , ,
The PMPF (Carbon Steel body) and  PMPSS (Stainless Steel body) non-electric pressure motive pumps are typically used when liquids must be moved to higher elevation, higher pressure or extended distances. This stand-alone pump is capable of operating with a maximum motive pressure of 200 PSIG provided by steam, air or other gas supply. These tanks are fabricated with 1/8” corrosion allowance and receive the ASME “UM” code stamp.
  • Equipped with our Patented “Snap-Assure” Mechanism which extends the useful life of the pump
  • Mechanism incorporates heat-treated stainless steel wear items
  • All stainless steel internals for ultimate corrosion resistance
  • Dual compression springs made from Inconel-X-750 for high-temperature corrosive service
  • Operates using steam, air, nitrogen or other pressurized gases as the motive force
  • Non-Electric – can be used in remote locations or NEMA 4, 7, 9 and hazardous areas
ModelPump BodySizeMax Motive Pressure (psig)Fill Head
PMPF-1X1-N-SS Carbon Steel 1" x 1"20012"
PMPF-1.5X1-N-SS Carbon Steel 1-1/2" x 1"20012"
PMPF-1.5X1.5-N-SS Carbon Steel 1-1/2" x 1-1/2"20012"
PMPF-2X1-N-SS Carbon Steel 2" x 1"20012"
PMPF-2X1.5-N-SS Carbon Steel 2" x 1-1/2"20012"
PMPF-2X2-N-SS Carbon Steel 2" x 2"20012"
PMPF-3X2-N-SS Carbon Steel 3" x 2"20012"

Catalog Spec Sheet (pdf)
I&M (pdf)

Description

Carbon Steel Non-Electric Pressure Motive Pumps are  capable of operating with a maximum motive pressure of 200 PSIG provided by steam, air or other gas supply. These tanks are fabricated with 1/8” corrosion allowance and receive the ASME “UM” code stamp.

For use when moving liquids to:

  • Higher Elevation
  • Higher Pressure
  • Extended Distances

The non-electric pressure powered pump shall be capable of operating with a maximum motive pressure of 200 PSIG provided by steam, air or other gas supply. The pump mechanism shall be float operated with a patented “Snap-Assure” feature. This is constructed of all stainless steel materials with all load bearing points hardened for extended service life. The mechanism shall feature two Inconel springs used in compression with motive & vent valves hardened to 40c Rockwell.