Description
Air Handling Unit COILS
Chilled water, hot water, or steam coils provide both excellent performance and long life. Full-size return bends and properly sized headers to ensure uniform flow and minimized pressure loss.
STRATOMIZER®
The Stratomizer Dampered Face & Bypass Coil offers a proven and efficient method of preheating and tempering fresh outside air. This is done by enabling the use of full steam pressure or hot water flow to the coil at all times, eliminating freezing.
FRAME
The MarloAIR’s frame is made of military grade extruded aluminum. This is used to provide years of rust-free performance. It features an integral thermal break to minimize thermal transfer.
WALL PANELS
All wall panels are constructed of galvanized steel and are insulated with a 2″ polyurethane foam core. This allows for energy efficiency and the prevention of condensation build up on exterior surfaces. The insulation is UL 94 V-O fire rated.
SERVICE DOORS
Access doors feature double wall construction with a minimum of two tapered pawl latches. The service doorts uniformly compress the door gasket (made of closed cell neoprene) into the door jamb for an air-tight seal.
BASE SYSTEMS
The base is constructed of 10-gauge galvanized steel with reinforced ribs for extra support.
UNIT FLOOR
The floors are constructed of heavy-gauge aluminum diamond plate to protect the insulated floor panels from damage. Floor panels are made from a sandwich of 24-gauge steel sheets on the outside with high-efficiency polyurethane foam insulation in the center. A durable coating is applied to the steel panels at the factory for added protection.
DRAIN PAN
The integral insulated stainless steel drain pan is double pitched. It conforms to ASHRAE standards for acceptable indoor air quality.
FANS & MOTORS
Direct drive fan and motor assemblies are designed to meet CFM and pressure drop requirements with minimal energy usage. All assemblies are mounted on vibration isolators.
Optional fan arrays are available with small, medium, and large modules with integral sound attenuation. These fan arrays are the solutions when space constraints or reduced noise is required.
MODULE LIGHTS
Light kits can be added to any module to make inspection and maintenance easier.
FILTER UNITS
Filter framing options include:
- 2″ pleated panel
- 4″ pleated panel
- 12″ rigid cartridge with 2″ pleated panel