Description
How Quick-Clean Suspended Permanent Magnet Works:
MPI’s Quick-Clean Suspended Permanent Magnets consist of a large plate magnet suspended over the conveyed product stream. The Quick-Clean Suspended Permanent Magnets should be suspended approximately 5” – 8” above the product stream for optimum tramp metal removal (8”-10” with bucking option).
The magnet should be located in an area that has easy access to allow for proper cleaning. Also, the magnet should operate in an area of the belt where no integral parts of the conveyor can become magnetized, such as idler rollers or belting support plates, as this may cause excessive wear on the conveyor system. To clean the magnet, simply grab the handle on the quick clean stripper and pull towards you until it hits stop. After all the metal has fallen from the stripper, slide the stripper face back into place.
Options:
- Self-cleaning models
- Custom support frames
- Heavy-duty sanitary design support frame
- “Bucking Magnet” configuration for enhanced strength and reach out, resulting in a performance increase of approximately 25%
- Ceramic, Rare Earth and exclusive Hi-G hybrid designs available